英文个人简历免费模板范文参考 英文个人简历模板范文5篇(7篇)

每个人都曾试图在平淡的学习、工作和生活中写一篇文章。写作是培养人的观察、联想、想象、思维和记忆的重要手段。大家想知道怎么样才能写一篇比较优质的范文吗？以下是我为大家搜集的优质范文，仅供参考，一起来看看吧

推荐英文个人简历免费模板范文参考(推荐)一

1.前言 preamble

一份标准英文合同通常可以分为前言（preamble）、正文（operative part）、附录（schedule）及证明部分即结束词（attestation）四大部分组成。 前言（preamble）由“parties”及“recitals”两部分组成。

“parties”为必备条款，在很多时候称为“commencement”即合同的开场白，主要介绍合同各方的名称或姓名、注册地及地址、邮编及在合同中的简称。当然，并不是所有的合同都要详细介绍以上诸要素，在许多简单合同中，只是提一下各方的名称。

i. 以下为“parties”的常用表达方式：

1. this agreement is entered into by and between ____ and ____. 本协议由以下双方____和___ 签署。

2. this agreement is entered into by and between ____ (hereinafter referred to as____) and ____ (hereinafter referred to as "_____"), whereby it is agreed as follows:

本协议由以下双方____（以下简称____）和_____（以下简称___）签署，达成如下协议：

注：在很多合同中，这部分加入签约事由，如：

this agreement is entered into through friendly negotiations between _____ co.

(hereinafter referred to as the “party a”) and _____ co. (hereinafter referred to as the “party b”) based on equal

ity and mutual benefit to develop business on the terms and conditions set forth below:

本协议由_____（以下称为甲方）和____（以下称为乙方）为发展业务在平等互利的基础上签订，其条款如下：

this agreement is entered into between _____ (hereinafter referred to as "company"), and ______, (hereinafter referred to as "employee") pursuant to paragraph viii(2) of the employee handbook, whereby it is agreed as follows:

本“协议”由_____（以下简称“公司”）与_____（以下简称“雇员”）根据“雇员手册”第viii(2)款签署，“协议”内容如下：

ii. 以下为标准的“parties”条款：

3. this agreement is made and entered into this _____th day of _____ in the year of ____ by and between ______, a company duly organized and existing under and by virtue of the laws of ______, with its principal place of business at _____ (hereinafter referred to as “_____”), and ______, a company duly organized and existing under and by virtue of the laws of _____, with its principal place of business at _____ (hereinafter referred to as “_____”), whereby it is agreed as follows:

本合约由______，在_____法律之下并凭该等法律正式组织并存在的公司，其主要营业地点在______（下称_____），与_____，在_____法律之下并凭该等法律正式组织并存在的公司，其主要营业地点______（下称代理人），于_____日签订和缔结，协议如下：

iii. “recitals”由数个以"whereas"字样开头的句子所组合而成（这些句子俗称为“whereas clauses”），表示当事人乃是在基于对这些事实（例如订约的目的、背景来由等）的共同认识，订立此合约。

4. this agreement is made and entered into this _____ day of _____ in the year of ____ by and between _______, a company duly organized and existing under and by virtue of the laws of ______, with its principal place of business at ______ (hereinafter referred to as “_____”), and ______, a company duly organized and existing under and by virtue of the laws of ______, with its principal place of business at ______ (hereinafter referred

to as “_____”)

witnessed

whereas, now therefore, the parties hereto agree as follows:

本合约由_____，在_____法律之下并凭该等法律正式组织并存在的公司，其主要营业地点在______（下称_____）（或下称供应商），与_______，在_____法律之下并凭该等法律正式组织并存在的公司，其主要营业地点_

鉴于

因此，双方当事人达成以下协议：

注：witnessed可以用withnessth、withnessth that等来代替。

iv. 在很多美国常用合同中，在很多情况下直接用recitals引导数个陈述语句或“whereas clauses”。下面为一个资产购买协议实例：

this asset purchase agreement (the "agreement") is made and entered into as of may 19, 1997 by and among aaa, a delaware corporation ("aaa"), bbb, a delaware corporation and wholly-owned subsidiary of aaa ("buyer"), ccc ("summit"), and ddd, an oregon corporation and wholly-owned subsidiary of summit ("seller").

recitals

a. the boards of directors of each of summit, seller, aaa and buyer believe it is in the best interests of each company and their respective security holders that buyer acquire certain listed assets and assume certain listed liabilities of seller (the "acquisition").

b. on the date hereof, buyer has executed a $2,000,000 irrevocable purchase order to purchase 400 time-based licenses for summit's visual hdl interfaces for visual test bench ("vtb") software on aaa's standard form of purchase order, which is payable within five (5) business days after the date hereof.

now, therefore, in consideration of the covenants, promises and representations set forth herein, and for other good and valuable consideration, the parties agree as follows:

2.定义 definition

在正文（habendum）部分，通常第一章为定义（definitions）部分。

定义条款即对合同中涉及的术语及名词作出限定、解释的条款。它可以散见于合同各个部分，但对于一些大型的、重要的合同，通常将其置于第一章。

i. 常见的定义语句常用mean, refer to, be construed as, include等来表达。如：

1. "territory" means the united states of america.“销售地区”是指美利坚合众国。

2. “commencement date” shall mean the date of signing this agreement by the last signing party hereto.

“协议生效日”是指本“协议”最后签字的一方签署本“协议”的日期。

3. the “agreement” herein referred to shall mean this agreement of agency by entrustment.

“协议”在这里是指本委托代理协议。

4. “code” shall refer to the current and applicable internal revenue code.

“法”是指当前可用的国内税收法。

5. reference to any statutory provision shall be construed as a reference to the same as it may have been, or may from time be, amended, modified or re-enacted.

引用法律规定理解为引用其本身外，还包括其修订、修正或重新实施案。

6. "expenses" include costs, charges and expenses of every description. “费用”包括各种形式的金钱支出。

ii. 还有一类特殊的定义语句，即对于「单、复数」及「阴、阳性」名词的范围定义。通常都是用include来表达：

1. "stock certificate" includes "stock certificate" and "stock certificates".

合同中的“股票”，包括单数与复数。

2. "he" includes "he" and "she".

合同中的“他”，包括“他”与“她”。

3. words using the singular or plural number also include the plural or singular number.

采用单数或复数的单词也包括复数或单数。

iii. 定义语句中，有时需限定范围。而通常用得最多的是：“for the purpose of ”及“in relation to”某概念的定义条款，如果适用范围仅限于合同的“特定部份”，可以用“for the purpose of ”来为定义条款起头。而如果定义条款是针对合同的“特定概念”，就用“in relation to”来界定。如下例：

1. for the purpose of this agreement, "products" means all types of the machineries manufactured by manufacturer as are specified in attachment

a hereto.

本协议所称的“产品”，指制造人所制造如附件a表列之各式机器。

2. "address" means－

(a) 就自然人而言in relation to an inpidual, his usual residential or business address; and

(b) in relation to a corporation, its registered or principal office in the republic of china.

“地址”就自然人而言，指通常之居所或工作场所；就公司而言，指位于中华人民共和国之注册所在地或主营业所。

iv. 在定义条款中，在定义语句前有时会加上一些陈述语句来引导，如：

推荐英文个人简历免费模板范文参考(推荐)二

销 售 合 同

sales contract

编号：contract no:日期: date:

签约地点：signed at:

卖方：sellers:

地址：address:

邮政编码：postal code:

电话：tel: 传真：fax:

买方：buyers:

地址：address:

邮政编码：postal code:

电话：tel: 传真：fax:

兹确认售予买方下列货品，其成交条款如下：

the seller hereby confirms selling the following goods on terms and conditions

(3)公差：数量及总值均有_____%的增减,由卖方决定

tolerance: with _____% more or less both in amount and quantity allowed at the

sellers option.

(4) 原产地

country of origin:

(5) 付款方式：30%预付，70%发货前一周付清

payment terms: 30% deposit, 70% payment within one week before delivery.

(6) 交货时间：收到预付款后15天内完成装运。

time of shipment: within15 days after deposit received.

(7) 贸易方式：fobshanghai

terms of shipment: fobshanghai

(8) 包装：胶合板木盘外封铁皮

packing： plywood drum with steel sheet cover.

(9) 保险：由卖方按发票全额110%投保至_____为止的_____险。

insurance： to be effected by seller for 110% of full invoice value covering _____ up to _____ only.

(10) 装运口岸：中国上海港

port of loading: shanghai port, china

(11) 转运：允许

transshipment: allowed

(12) 分批装运：允许分批装运

partial shipment: allowed

(13) 目的口岸：

port of destination:

(14) 唛头：shipping marks：

(15) 单据：documents：

(16) 品质与数量、重量的异义与索赔：quality/quantity discrepancy and claim：

(17) 逾期发运：如果由于买方原因造成逾期发运，买方承担责任。造成自签订合同之日起超过45天不能发运的，卖方将每日按货物金额的3%收取保管费；如果由于买方原因造成逾期发运超过6个月，卖方有权自行处置定金和货物。如果是卖方原因造成的逾期发运，卖方需提前告知买方并得到买方的确认并承担其他相关费用。

last shipment: if the late delivery is caused by the buyer, the buyer shall bear the

responsibility. if the delay has being made more than 45 days from the signing of the sales contract hereof, the buyer shall pay 3% of total amount each day, and if the delay is more than 6 months, the seller has the right to dispose the down payment and the goods. if the late delivery is caused by the seller, the seller shall inform the buyer in advance and get confirmation from the buyer, and the related expense shall be born by the seller.

(18) 质量/数量异议：对于质量方面的异议，买方必须在货物抵达目的港后30天之类提出：对于数量方面的异议，买方必须在货物抵达目的港后15天之内提出。对由于保险公司、运输公司、其他运输机构或邮局的原因所造成的货物差异，卖方不负任何责任。 quality/quantity discrepancy: in case of quality discrepancy, claim shall be filed by the buyer within 30 days after the arrival of the goods at port of destination; while for quantity discrepancy, claim shall be filed by the buyer within 15 days after the arrival of the goods at port of destination. it is understood that the seller shall not be liable, for any discrepancy of goods shipped due to causes for which the insurance company, shipping company, other transportation organization or post office are liable.

(19) 不可抗力：卖方对由于下列原因而导致不能或暂时不能履行全部或部分合同义务的，不负责任：水灾、火灾、地震、干旱、战争或其他任何在签约时卖方不能预料、无法控制且不能避免和克服的事件。但卖方因尽快地将所发生的事件通知对方，并应在事件发生后15天内将有关机构出具的不可抗力事件的证明寄交对方。如果不可抗力事件之影响超过120天，双方应协商合同继续履行或终止履行的事宜。

force majeure: seller shall not be responsible for failure or delay in performance of entire or portion of these sale contract obligations in consequence of force majeure incidents: flood, fire, earthquake, drought, war, or any other matters couldn’t be foreseen or controlled or couldn’t be avoided. but seller shall inform the incidents to buyer immediately, and shall delivery the certificate of force majeure incidents issued by related organization within 15 days after the incidents happened. if the incidents influence more than 120 days, both parties shall negotiate to decide whether to execute or terminate the sales contract.

(20) 仲裁：因履行本合同所发生的一切争议，双方应友好协商解决，如协商仍不能解决争议，则应将争议提交中国国际经济贸易仲裁委员会（北京），依据其仲裁规则仲裁。仲裁裁决是终局的，对双方都有约束力。仲裁费应由败诉一方承担，但仲裁委员会另有裁定的除外。在仲裁期间，除仲裁部分之外的其他合同条款应继续执行。

arbitration: all disputes across from the execution of, or in connection with this sales contract shall be settled friendly through negotiation, in case no settlement can be reached, the case shall then be submitted to china international economic and

trade arbitration commission, beijing for arbitration in accordance with its provisional rules of procedure. the result of arbitration shall be born by the losing party except for the condition the commission has other judgment. during the arbitration period, clauses beside of the arbitrated parts shall be executed.

(21) 本合同为中英文对应，一式两份，买卖双方各执一份；合同自卖方签字盖章、买方签字后生效（传真件以及扫描具有正版相等法律效应）。

the sales contract is concluded in chinese and english with same effectiveness, and will come into effect on stamp of seller and signing by buyer. the sales contract is in dual original and each party shall have one original copy of this sales contract. (any scanned and faxed copy shall have the same legal effect as the original one.)

(22) 备注：remark：

买方确认签署： 卖方确认签署：

for and on behalf of buyer:for and on behalf of seller:

推荐英文个人简历免费模板范文参考(推荐)三

论文题目：机载sar回波频率域仿真研究

论文进展状况：该毕业论文包括以下几个部分：

1、合成孔径雷达（sar）相关资料的搜集；初步了解sar系统。

2、撰写开题报告，翻译外文文献，进一步加深对sar系统的理解。

3、研究sar回波的产生以及仿真算法，并上机操作。

4、后期资料数据的整理和分析，撰写毕业论文。

5、修改、完善毕业论文，准备答辩

本人已完成毕业设计初期工作，包括开题报告，文献阅读以及英文文献翻译。开题报告使我充分了解机载sar回波频率域仿真研究这个课题。外文翻译锻炼了自身英文水平，知晓英文术语，并且更深入地了解sar回波仿真。

已检索与阅读大量中英文文献和有关书籍，了解合成孔径雷达（sar）军事上的重要用途，初步了解sar的基本原理，包括雷达的相关知识，重温了数字信号处理中傅里叶变换和滤波器的设计。

目前，正在进一步熟悉sar回波信号的生成与仿真。了解仿真算法。

存在问题及解决的措施：

在前期研究过程中，某些知识不过关，一些基本问题无法得到解决，经过查阅有关教科书和请教老师，这个问题逐渐得到缓解；在撰写论文开题报告时，参考文献的格式书写有误，后期校验出现不少纰漏，认真参照相关规定，最后将其改正。在外文翻译初稿中，出现语病，专业词汇翻译不准确、格式书写有误等问题，经过审阅多遍完成了该任务。

根据教务处《关于做好xxxx届本科学生毕业设计(论文)中期检查的通知》文件精神，教科学院认真组织了自查工作。现将自查情况汇报如下：

学院领导和毕业论文领导小组成员在毕业论文领导小组工作会议上认真学习了《通知》精神，做了专门讨论和研究，决定成立由学院督导委员会成员为组成的毕业论文中期检查专家组，具体负责本次毕业论文中期检查工作，制定了工作步骤、方式和要求，安排好各自任务。

我院依据学校的检查通知，参照通知要求的检查内容和方式，制定了周密详细的工作计划。分两个阶段进行检查。第一阶段是自查阶段，学院教学管理科、指导教师和学生自我检查论文中期工作情况，并且做好学院检查的准备。第二阶段是学院检查阶段，对学院的管理资料、指导教师的《中期检查表》和部分学生的论文资料进行全面检查。在全面检查的基础上，分别召开指导教师和学生座谈会，听取他们对学校、学院在毕业论文工作的规章制度、保障措施等方面的意见和建议，以进一步规范管理和提高毕业论文的质量。

在自查阶段，学院各方面都能够认真仔细，圆满按时保质保量地完成工作。

3月6日下午，我院督导委员会成员按照计划安排，分别进行了资料检查、教师代表座谈会和学生代表座谈会。

(一)毕业论文中期资料检查

按照教务处《通知》要求，我院决定对于学院的相关文件资料和指导教师的《中期检查表》进行全面检查，学生论文资料抽查不少于总数的1/4，每班随机抽取1名学生的资料，检查论文工作的完成情况。具体检查情况如下：

1管理方面：

学院毕业设计(论文)工作管理文件，包括文件、通知等资料完整、规范、有序。毕业论文工作计划制定详细具体，符合学校的要求，切合学生的学习情况，整个论文工作执行基本按照计划安排的时间点推进，目前论文工作已经完成计划的8%多。学院制定的《毕业论文实施细则》符合学院学科专业特点与要求，符合学校的`毕业论文工作要求，对于毕业论文工作的各个方面工作要求细致而明晰，一目了然。

为了保证学生论文的质量，学院做了大量的前期准备工作，比如制定了详细的《毕业论文实施细则》，在撰写过程中通过多种方式狠抓落实。首先严把三道关：选题关、开题关、答辩关。第二开辟三个信息渠道：一是通过各班的信息点、二是通过学院网站毕业论文专栏、

三是通过指导教师和班主任。第三创建两条管理线：一条线是学院毕业论文领导小组，二是从系主任、教研室主任行政管理这条线进行管理。形成了多方面多渠道多形式的管理模式，以保证并提高我院毕业论文的质量和水平。

为了保证论文按时保质完成，新学期开始，我院加强了对毕业班学生的管理。开学伊始，我院就召开了毕业班学生大会，重点强调了毕业论文撰写期间的学生管理。要求全体学生在没有特殊事情的情况下必须在校认真撰写论文，如果需要请假，首先要征得指导教师同意，并且要得到学院主管学生工作的副书记签字同意方可离开学校。

：

绝大部分指导教师工作认真负责，悉心指导，不怕麻烦。对于学生论文指导方式有当面指导和网络指导两种，对每生平均指导次数超过1次。指导教师的认真态度、仔细程度以及对学生的严格要求得到了学生的高度评价。

指导工作记录比较及时、完整，对于网络指导情况的记录也能在事后及时补充。指导方法多元化，指导教师一般都能够依据学生的特点以及论文研究内容的方向制定合适的指导方法，这样既能够让学生容易接受，又有利于论文工作的顺利推进。论文工作经过选题、审核选题、文献检索、翻译、开题报告，目前学生的论文撰写工作已经进展到最后定稿阶段，等待审阅、评阅。

指导教师们认为，大部分学生撰写论文的态度认真、工作积极，基本上能够按时完成论文的阶段性工作。为了保证学生论文的质量，各位指导教师通过面授和网络指导等方式不辞辛苦地指导学生查阅文献资料、撰写和修改论文提纲、一遍遍阅读和修改论文。虽然工作进展顺利，但是其中也存在着诸多的问题和不足，例如有的学生知识储备不够、有些学生因为考研和找工作耽误论文的撰写、个别学生积极性和主动性不高拖拉延宕等等。对于这些问题和不足，学院和老师们密切配合，有针对性的采取措施，使得这些学生基本能够顺利完成任务。

按照《通知》要求，抽查学生不少于全体学生的1/4，我院决定每班随机抽取1名学生的论文资料进行检查，共抽查了6名毕业生的前期文献，包括：选题审批表、任务书、开题报告、文献综述、外文翻译、中期报告(学生)。检索文献和参考资料比较充分，文献综述撰写符合要求，开题报告基本规范。从指导教师的《中期检查表》反映的内容来看，绝大部分学生态度认真，积极性较高，学生的论文撰写工作进度正常，基本已完成全部任务的8%以上，还没有发现抄袭现象。这反映了本届毕业论文工作总体情况良好，绝大多数指导教师及毕业生的态度都是认真负责的，保障了本届毕业工作进展比较顺利，而且质量基本符合要求。

但检查中也有个别毕业生材料不完整，需要进一步补充和完善。

专家组分别召集了八位毕业论文指导教师和十五位学生代表进行座谈，听取了教师和学

生对本届毕业论文工作的意见和建议。

教师们对今年毕业论文的组织领导工作基本满意，认为与前两届毕业论文工作相比，在组织管理上更加有序。学生对本届毕业论文的工作流程安排及组织工作基本满意，认为指导教师总体上是负责的，有些教师的指导非常认真。

座谈会上师生对学校和学院毕业论文工作的意见和建议主要有以下几个方面：

1.学校的论文假期与论文进程不符，建议学校要作调整。

2.学生反映学校图书馆专业外文资料太少，学生查找资料难度太大。建议学校加大这方面的投入，为学生提供方便。

3.学校下拨的论文指导经费太少，有些工作的开展有难度，希望学校适当增加。

通过这次自查，我院在一下方面取得了一些成绩：

1、管理方面更加规范

2、指导教师更加认真负责

3、学生的态度更加积极和论文质量有一定提高

推荐英文个人简历免费模板范文参考(推荐)四

欢迎前来阅读浏览关于简历的。内容，小编将会及时为你整理更新关于简历的参考内容，希望对你提供帮助。

简历模板

质量经理英文简历模板

name: mr. g gender: male

wedlock: married nation: han

residence: jiangxi-ganzhou age: 39

location: jiangsu-nanjing height: 165cm

target locations: shanghai、 zhejiang、 jiangxi、 jiangsu、 hubei

target positions: quality/safety management-qa/qc manager/supervisor

management-branch manager/director

management-department director

industry/factories-quality control manager/director

target jobs: qa manager/director、 sqe manager/director、 qm/system manager

education

2001-03 ~ 2005-06 shen zhen university business management bachelor degree

1996-09 ~ 1999-07 xinyu college english junior college

1993-09 ~ 1996-07 ningdu high school arts high school

training

2006-03 ~ 2006-03 bvqi（guangdong） co.，ltd iso/ts16949:2002 internal auditor training internal auditor

2005-04 ~ 2005-04 tuv rheinland （guangdong） ltd iso14001:2004 internal auditor training internal auditor

2004-09 ~ 2004-12 c&k consultancy six sigma green belt

2004-03 ~ 2004-06 c&k consultancy lean manufacture course-completion certificate

2001-05 ~ 2001-05 tuv rheinland （guangdong） ltd iso9001:2000 internal auditor training internal auditor

work experience14 years 0 months work experience,and served on 3 companies.

【you are not full member,please contact us.】 （2006-06 ~ present）

company type: joint venture company category: electrical,micro-electronics

job title: quality manager positions: branch manager/director

job description: 1. establish,maintain and improve qms（including gjb9001b-2009），ehs & ems（include rohs &gp）& product certificate（e.g.: 3c, ul,ce,jis,csa,tuv etc.） and its documentations, education and training of quality and engineering tools/methods/demands/standards in production,quality and engineering. administer the central document control ，lab and calibration activities.

e the quality of material,npi,processes and aftersales,monitor daily operation quality status,harmonize each department to resolve process quality issue in time,lead the special quality case improvement,direct and monitor my subordinates work plan,working status,kpi performance and evaluation;

top managemet to set company goals/targets, guide and monitor all departments to set,implement,do statistic analysis their objectives and its kaizen activities（such as yield rate, equipment utilization rate,oay,lar,etc） ；

ze supplier,internal,customer and 3rd parts audit on iso system,process and product,and report its performance to top managerment,communicate on the matter with external parties such as government, customers（e.g.: airbus, cast, zhenhua electronics group,osram,ge, gm, volkswagen,motorola,lenovo, zte, tianyu, huawei, samsung ， sony,panasonic,etc.）and certification organization（e.g.: sgs,tuv,bvqi,cqc）。

,implement and upgrade quality team,team work,milestone,cost down,quality management （including dqe,lab test,sqe,iqe,pqe,oqa,8d,supplier management,ie,pe,npi），data statistic analysis,project management,lean production,production plan,logistics management,damic,based on the demands and standards of client, international organization and company.

the main customers project and oem project manangement.

direct, coach and motivate our staffs and suppliers how to achieve effectively our objective and growth.

perform other duties

achievements:

1、 have qc080000:2005 certificated by sgs and iso9001:2000certificated by bvqi in mar,2007, iso14001:2004 certificated by sqc in sept.，2007,iso/ts16949:2002 certificated by bvqi in nov.， guide three suppliers to have iso/ts16949:2002（issued by bvqi）/iso14001:2004 and qc080000（issued by tuv） certificated.

and organize the performance excellence evaluation. in nov 2011,direct our company to have gb/t***certificated by district government review team and got rmb200 thousand district mayor reward.

our staffs and suppliers to master and apply the knowledge of apqp/ppap/fmea/spc/msa,tqm,6σ，7s,qc tools and qe&ie&pe improving. and from oct. 2007 to now, we decrease iqc lrr from 15% to 2.5%，save material cost 17%，decrease claims from 22pcs to 3pcs monthly ， failure quality cost from rmb300000 to rmb10000 below monthly,fqc defect ratio from 4600ppm to 1000ppm and increase total profit 30% per year.

reason for leaving: contract will be on term and looking for better development

【you are not full member,please contact us.】 （2003-12 ~ 2006-06）

company type: multinational enterprise company category: machine-building,machine,heavy industry

job title: quality manager positions: qa/qc manager/supervisor

job description: ish,maintain and improve qms & ems and review their accordance with iso9001,qs9000,ts16949 & iso14001 standards. and possess the iso9000/qs9000/tso14001/ts16949 internal auditor certificates.

the performance of the quality issue, qms & ems and deal with the matter with external parties.

charge of cost down, quality control, quality assurance, continual improvement and audits: internal audit, supplier audit, customer audit and 3rd party audit.

ster the central document control and calibration activities and guide to establish the procedures document ，sop and sip.

5、 plan and consummate qm team and coach how to apply apqp, ppap, fmea,spc, msa,tqm, 6σ，qcc, qc tools and qe improving 。

achievements:

2005 ts16949:2002 certificated by bvqi and 3 times surveillance audit of iso9001:2000（bvqi certificated） and of iso14001:2004（tuv certificated）；

d the claim from 20 issues to 3 issues and cost down from rmb150000 yuan to rmb20000yuan per month after five month hard working（2004.5~12），increase the profit 42%， company scale and qm team have been double developed in 2005.

reason for leaving: have better development and working environment

【you are not full member,please contact us.】 （1999-07 ~ 2003-11）

company type: foreign enterprise company category: electrical,micro-electronics

job title: from sqe to qa supervisor positions: qa/qc manager/supervisor

job description: 1999/07—2001/10 act as sqe and in charge of iqc, the main job as follow:

ish sip,coach,arrange and monitor iqc to inspect hardware,plastic and electronic components,review the iqc reports, check on iqc work attendance and performance;

m, primary analyze, feedback and assist supplier to review and improve the material quality issue occurred in iqc and our process,besides,handle the defective material and trace the validity on the corrective action.

y the monthly iqc quality report such as lrr, dppm in process, and do analysis, improvement and track on the top three defect items.

ish, develop, implement and improve supplier quality assurance, policies, goals, objectives, management process, and procedures including supplier assessment, qualification, certification and qdc performance;

ing to our development strategy, quality plans and performance targets, co-work with the relative unit （buyer, engineer and other business） to provide supplier quality team with scheduled or timely communication, training, and support in qms & ems（eg. iso9001/ts16949/iso14001/rohs/gp）， management requirements and expectations, quality issues solution, continuous technical improvement activities ， so that the vendors can drive high performance and adequate supply of the qualified parts, material and service;

in the corporate approved vendors list, qualify new supplier or sub-contractor and organize annual key supplier audit with purchasing and engineering in order to ensure vendors’ compliance to procedures and completion of any outstanding items previously identified.

sible for identifying, clarifying and correlating the critical specifications and procedures in manufacturing and test processes with supplier, requesting quality reports or records, and approving fai and ppap for new or modified items from supplier.

ed in mrb disposition, call on the supplier quality review/improvement meeting and perform other duties as required.

2001/10—2003/11 act as qa supervisor,the main job as follows:

ish,maintain and improve qms,ehs & ems relating to iso9001/ qs9000/iso14001 standards. 。make up the procedures documents,sop and sip.

ng our staffs and suppliers to apply apqp,ppap,fmea,spc,msa,tqm,6σ，6s,qcc and qc tools to monitor, analyse and improve the process ability.

3、 in charge of supplier management,iqe,ipqe,oqa,new product apqp,quality audit and customer service（8d）

achievements:

our company to gain iso14001 certificate issued by tuv in dec,1999 and qs9000 certificate issued by bvqi in july,2001;

2、 assist four vendors obtaining the certificates of iso9001/qs9000/iso***issued by bvqi or afaq;

the qualification of service to the following international groups:ford,gm,higer,sony,fujifilm,panasonic/ national, philips, liteon, china machinery corp, matic etc.

se iqc lrr from 17.5% to 1.2%，reduce the material cost 7%，control cpk≥1.33 and the process defect ratio≤0.3%，keep the claim ratio under 0.1%，the profit above 35% ，the employee from 600 to 1300,qe team from 2 to 6 staffs.

reason for leaving: go home for education exam

project experience

total 3 project experience （2003-12 ~ 2011-10）

job title: ci director

project description: ***:projects management of new products and its apqp management

software environment: erp

development tools: apqp,doe,spc

project description: one year from june 2008 to june 2009 to achieve mass production of 5 types of pesd.

8 months from may 2009 to dec 2009 to achieve mass production of 6 types of chipfuse.

oct 2009 to dec 2011 to achieve mass production of camera module,solar cell module,led lighting,etc.

responsibility: design and development review,verification and validation to new products and establish its apqp,kept them running and continual improvement.

--------------------------------------------------------------------------------

***:establish new iso system for 7 times

software environment: erp

project description: 3 months to build iso/ts16949:2002 from mar 2006 to may 2006;

3 months to build ohsas18000 from aug 2006 to oct 2006;

2 months to build qc080000:2005 from mar 2007 to may 2007;

3 months from sep to nov 2007 to build iso/ts16949:2002;

3 months from oct to dec 2008 to build so9001:2008;

one month in june 2010 to certificate iso17025;

2 months from june to july 2011 to build national military standard gjb9001b-2009;

responsibility: build new iso system documents and its training,certification,maintainance and improvement.

--------------------------------------------------------------------------------

***:upgraded the iso management system for 3 times

software environment: erp

development tools: apqp,fmea,spc,msa,ppap,doe

project description: one month in dec 2003 to upgrade iso9001 from version 1994 to 2000;

one month in may 2005 to upgrade iso14001 from version 1996 to 2004;

3、 spent one month in dec 2010 to upgrade ts16949 from version 2002 to 2008;

responsibility: iso system and its documents training,certification,maintainance and improvement.

responsibility: refer to above project description.

special skills

professional title: tqm&lean production&ace

computer level: junior

computer skills: ully apply office 2000 to build the form and do statistical analysis and photoshop7.0 to edit the photos.

applying auto cad to layout the product.

ully apply the statistical soft such as spcc,minitab to do statistical analysis and continuous improvement.

strengths: 1.13+ years experience of mnc operation and tqm,so gain rich abilities or skills in communication, leadership, damic, team building, teamwork, target value, overall performance audit,cost down,claim disposure,data statistic and analysis,project management,lean production, production plan,logistics management,customer and supplier relation management.

qms（iso9001/gjb9001/vda6.1/qs9000/ts16949/tl9000）/ehs/ems（iso14001/qc080000/rohs/gp） and such product certification as ul/3c/ce/iec/tuv/csa/jis,and master,coach and apply iso,apqp,ppap,fmea,spc,msa,tqm,qcc,6σ，lean manufacture,qc tools and qe&ie&pe improving.

years project management on new products（led lamp&lighting,camera module,solar cell & its module,pesd and chip fuse,assure to meet or exceed customer needs,expectations and timing plan at valued cost according to my product quality planning timing chart for these 5 phases of concept initiation/approval, program approval, prototype, pilot, launch and such 6 processes as plan & define program, product & process design and development review, product & process design and development verification, product & process validation, feedback assessment and corrective action by apqp tool.

engaged in production operation,tqm in below fields:

a:plastic electronic and automotive parts injection,connector,cable & cooler（above 4 years）；

b:tooling,pressing&annealling&plating（terminal,shell,motor core and ic lead frame） and power coating（7 years）；

c:semiconductor components（led lamp & display, ic,diode,chip fuse,gdt,mosfet,tvs,pesd,ptc,pptc,led lighting）（above 10 years）；

d:assembly of ccm under csp or cob process & non-ccm products（5.5 years）；

e:automotive parts and electronics（tool box,handle,camera,head light,stoplight,dashlight）at smt,cob,csp and m/s process（ above 10 years）；

f:solar cell and its module（3 years）。

language skills

chinese: good cantonese: general

english level: majored in english cet-6 spoken good

english: skilled

career objective

career direction: qa/qc manager/director/deputy gm ，sqm manager,operation director/manager, qms&ems manager ， ceo/gm/president assistant.

requirements: five working days and abide by labor laws;

self info.

self assessment: year experience in foreign trade and purchasing business, familiar with operation and management of documentation;

as sjqe appointed by our customer osram,samsung,lg,philips to deal with all affairs related with them,such as operation performanc data reporting,quality management,otc and tdm confirmation,new product and project management,audit,etc.

t company has 40% sales revenue from oem customers（eg.:vishay,ge） and 20% one from odm customers（eg:osram,philips），also 20% capacity needed for oem,build and keep good relationship with oem and his suppliers,in addition,guide,implement and improve supplier quality system,management process,and procedures including supplier assessment,qualification,certification and qdc performance.

hobbies: swimming,reading.

sional tqm with strong ability in innovation,team built,teamwork,leadership and communication.

problem solving, preventive, ci and strategic planning and solid practice 。

sional customer projector quality management,8d, npi and supplier（including oem） quality management.

pled, honest, strict.

,affirmative,aspirant,honest, striving responsibility with steady-going and sure-footed working &life style.

rewards

excellent staff 2002-02-03

certifications

iso/ts16949 internal auditor 2006-03-19

ie工程师英文简历模板

name: mr. r gender: male

wedlock: single nation: han

residence: guangdong-qingyuan age: 28

location: guangdong-dongguan height: 173cm

target locations: guangdong

target positions: industry/factories-industrial engineer

industry/factories-production management clerk

industry/factories-technic engineer

target jobs: industrial engineer、 lean engineer

education

2005-09 ~ 2009-07 guangdong university of technology industral engineering bachelor degree

training

2008-12 ~ 2008-12 guopei certificate internal quality auditor training &qualification

【company name】 （2011-07 ~ present）

company type: private enterprise company category: electrical,micro-electronics

job title: industrial engineer positions: industrial engineer

job description: : process planning, fixture and equipment planning, prepare process checklist

rd time and capacity evaluation, line balance and prepare sop for new products

in the usage of the consumptive material, standard time and capacity

m line balance and improve process to rise capacity

and improve the tools and fixture in the work site

r the efficiency of the production line, analyze these reasons manpower, machine, material ， environment, method, push the relative dept to solve issues

project planning and push: auto-machine introduce, production way optimize, manpower and material saving, etc

career highlight:

-welding machine introduce: welding process operator saving（16 operators-12 operators=4 operators）， line balance rate upgrade from 83% to 91%， solder wire saving 3.2grams, cost of solder wire saving 1.6 yuan rmb for each pcba.

-packaging production line planning and implement: master carton packaging operator saving, every production line deploy 2 packaging operators for 8 lines, after introduce the new equipment it takes only 5 operator to seal the master carton

cabinet pre-process and final assembly combine: manpower saving include 1 conveyer, 1 visual inspector, 1 loading operator and 1unloading operator（total 4 operators）， and saving the usage of bubble bag and partition board

tive plate incoming package improvement: change the package material and simplify package way to reduce pack cost（from 0.13yuan to 0.09yuan rmb） and cut down unpack operation time（ saving 12 seconds）

ate with rd to change pcba process from dispensing process to solder paste process, in order to cut down welding failure rate after wave-soldering. in this case charge of pcba fixture design and improvement evaluation（repairing welding time 140sec reduce to 70sec,4 repair welding operators cut down to 2 operators）

ing to the small order quantity of the product, study the less humanizing process for small products to reduce the change over loss time（38 operators*30minute-

20 operator*40minutes=340minutes） and improve 8% of the motion effective rate

reason for leaving: not very good economic benifit of the company,little chance to promote both in position and welfare

【company name】 （2009-07 ~ 2011-06）

company type: joint venture company category: electrical,micro-electronics

job title: junior engineer positions: industrial engineer

job description: ish and maintain the standard labor time, perform line balance to improve production capacity

capacity assessment: base on the mps and the capacity of production line to forecast the workforce requirement

e the cost study report for new products, labor rate evaluate basis on factory operating cost, provide quotation to customer for special process

e the workshop layout and line layout design basis on logistics analysis

ch and develop new packaging method, develop new suppliers for packing material, make order for new packing material and follow up the schedule

with customer complaint and settle products packaging issue, improve packaging method to satisfy customer

career highlight:

1、 function test man-machine operation improvement: cooperate with te to disassemble

and rearrange test item, and modify the way of program display in the monitor, in order

to realize one person simultaneously operate two test machine

2、 line balance improvement: provide the cycle time of each model to set up assemble line speed, and upgrade the line balance rate to 80% above for all model

reason for leaving: not a very good department to pratice and learn ie skill,seek more chance to enhance myself

special skills

professional title:

computer level: national computer exam. grade 3

computer skills: familiar with windows,be good at microsoft office software;

passed national computer rank exam of database technology ；

y in auto cad of computer aided design software;

strengths: familiar with method study and standard time measurement, know well about work study technology including 5w1h inquire skill and ecrs four principles

y in ie seven techniques, comprehend production management essentials

and the activity about 5s.

familiar with logistics analysis during the production process, be capable of

facility planning and machine layout

about the basis quality management tools, such as seven qc methods and fmea technique

language skills

chinese: good cantonese: good

english level: cet-4

english: good

career objective

career direction: a position as ie engineer or lean engineer which will use the ie concept and lean production to reduce the cost of enterprise running ，promote the competitive strength,as a result to achieve the win-win target with enterprise.

requirements:

self info.

self assessment: or degree in industrial engineering, have good sense in cost down, and have successful case of improvement

in taiwan electronic company for almost two year, be familiar with smt, dip, repair welding, final assembly, test and packing process

hands-on skills, have experience in guiding operation for new production first mp

skill in auto-cad, can design and make fixture in the workshop

communication and organization skill in working with other department, have some experience in training

sibility for work and a man of great loyalty, able to learn, patient and positive.

推荐英文个人简历免费模板范文参考(推荐)五

尊敬的公司领导：

您好!

我xx因为个人原因以及要在9月返校这样的情况，不能再为公司的发展出自己的一份力了，深表歉意，特此向公司提出个人辞职申请，还望公司领导可以见谅并予以批准。

我从进入公司几个月以来，对大道的公司文化精神耳濡目染，深深地感受到达到大道家庭的温暖，也从不间歇地得到营业部负责人的培养与信任，因此由衷地感谢大道物流，同时也感谢所有的大道家人们!

“知难而进，永创新高”这一大道精神必将伴随我走过未来的职业生涯，“懂得感恩，成就他人，积极进取，成就大业”定将使我的价值观得以升华!因此，我非常感谢大道物流公司给我提供了在这样的良好环境下工作和学习的机会，也要感谢我所在营业部毕主管及同事们的热心指导与悉心帮助，感谢他们对我的器重与信任，使我的社会经历不断地丰富与更新!

离职在即，我真心地祝愿大道物流公司的业绩蒸蒸日上，永创新高，更早更完美地实现“成为中国物流第一”的大道愿景!

此致

敬礼

辞职人：xx

xx年x月x日

辞职信模板 | 辞职信格式 | 辞职信怎么写 | 英文辞职信

辞职信模板 | 辞职信格式 | 辞职信怎么写 | 英文辞职信

推荐英文个人简历免费模板范文参考(推荐)六

在企业的求职条件常常可看见cv，cv到底是什么？所谓的cv即是curriculum vitae的缩写，也就是简历表的意思。

许多重视英文能力或外商企业征才时皆会要求求职者提供一份英文简历表。

1、个人联络方式

2、应征职务（position desired）

3、工作经验（employment record）—资历、公司、部门、职称、简述工作内容

4、教育程度（education）—期间、学校、科系

5、个人技能（skills）

1、可将字体放大，但不超过一页

2、撰写完一定要检查数次，确定文法及拼字无误

3、简洁有力，忌拖泥带水。

推荐英文个人简历免费模板范文参考(推荐)七

首先是国外的英文简历一般都尽量不写性别、年龄和种族等涉嫌个人隐私的信息，因为从法律佣工角度，这些信息是涉嫌用工歧视的，招聘单位一旦被诉在招聘中涉及性别歧视、年龄歧视或种族歧视等有违法律条款的行为，是要付出巨额赔偿的，因为外国人认为一个应聘人是否符合某个招聘岗位的要求，是取决于应聘人的职业背景和职业技能水准，而不是上述信息。但是对在国内的外企，你还是把上述信息、包括你的户口所在地，都老老实实地加在英文简历上吧。咱们不认为这是歧视。

本身是主管， 简历 少说也看了几万封了，发现有一些通病是很多人会忽略的，而那些招聘网站或者 简历 中心也没有很专业的教你怎么写一封好的英文 简历 。

本人比较偏好word版的简历，因为目前收到最多的还是模板简历，这样看起来虽然清楚，但是在每天过滤不下100封简历的时候，附件中的简历还是比较令人期待的。

当然在国内中文简历比较重要，但是现在的趋势就是双语，有时候中文写的洋洋洒洒，英文确令人哭笑不得。通常 面试 外企，多少都会有老外 面试 ，一份得体的英文简历还是很重要的。

word的好处是有简历模式，而且也有简历的范本，适合新鲜人使用。

不鼓励用excel和pdf做简历。

英文简历用词

- 结了婚是married, 未婚就是unmarried? 偶尔看到有人写上single会倍感安慰

- 个性有闯劲，最好还是不要用aggressive，中文感觉还可以但其实英文里这个词是非常负面的，有暴躁的意思，不是优点。用energetic或者spirited比较好

- 英文和中文一样，标点符号后要空一格，不要所有句子挤在一起

- 很多人喜欢在写职责范围的时候写上be responsible for , 文法上来说是不需要的。这些事情是你已经做过的，直接说 responsible for all outgoing couriers 就可以了

- 英文有很多缩写，但是在像简历这种正式场合还是少用为妙，比如dont可以换成do not，千万不要用那些wanna, gonna来代替want to, going to

用招聘网站的模板可以比较轻松，不过切忌检查错别字，因为模板上的是没有拼写检查的

英文简历格式和页面

- 写完后一定要去页面设置去除多余的空白页面，或者是orphan和widow现象，也就是单句的句子在页面的最上面，最好是合并到前一页

- 记得调整字体和大小，有些人的简历除了不同颜色以外还用不同字体，就像是在不同网站上粘贴过来的，非常不专业。

- 简历最好不要超过3页，言语要精简，最忌讳像论文一样，但是没有重点

- word本身带有拼写检查，你这里满页都是红线，我这里看到的也都是红线

下面这十个毛病可是 简历 中不该犯的。对照检查一下你犯错了没有?如果有，要赶快改吧!

1、拷贝别人的 简历 格式;

2、个人信息(没人在乎你单身、结婚、拉提琴还是踢足球);

3、只有事实，没有表现(responsibilities/accomplishment/yourownrole);

4、不写日期(只列公司，不列日期);

5、怨恨字眼(leavereason:sexualharassment/firedmefornogoodreason);

6、工作经历太乱(换行业太频繁);

7、非职业化，不整洁(使用鲜艳的彩色纸/茶杯印);

8、太多不相关经历(只有你的家人才会关心你大学以前的事情);

9、只有 简历 ，没有coverletter。

10、没有适当的目标(着急找工作并不表示应该广种薄收);