英文简历常用语词汇4 英文简历术语(五篇)

人的记忆力会随着岁月的流逝而衰退，写作可以弥补记忆的不足，将曾经的人生经历和感悟记录下来，也便于保存一份美好的回忆。相信许多人会觉得范文很难写？这里我整理了一些优秀的范文，希望对大家有所帮助，下面我们就来了解一下吧。

如何写英文简历常用语词汇4一

sales contract

编号：contract no:日期: date:

签约地点：signed at:

卖方：sellers:

地址：address:

邮政编码：postal code:

电话：tel: 传真：fax:

买方：buyers:

地址：address:

邮政编码：postal code:

电话：tel: 传真：fax:

兹确认售予买方下列货品，其成交条款如下：

the seller hereby confirms selling the following goods on terms and conditions

(3)公差：数量及总值均有_____%的增减,由卖方决定

tolerance: with _____% more or less both in amount and quantity allowed at the

sellers option.

(4) 原产地

country of origin:

(5) 付款方式：30%预付，70%发货前一周付清

payment terms: 30% deposit, 70% payment within one week before delivery.

(6) 交货时间：收到预付款后15天内完成装运。

time of shipment: within15 days after deposit received.

(7) 贸易方式：fobshanghai

terms of shipment: fobshanghai

(8) 包装：胶合板木盘外封铁皮

packing： plywood drum with steel sheet cover.

(9) 保险：由卖方按发票全额110%投保至_____为止的_____险。

insurance： to be effected by seller for 110% of full invoice value covering _____ up to _____ only.

(10) 装运口岸：中国上海港

port of loading: shanghai port, china

(11) 转运：允许

transshipment: allowed

(12) 分批装运：允许分批装运

partial shipment: allowed

(13) 目的口岸：

port of destination:

(14) 唛头：shipping marks：

(15) 单据：documents：

(16) 品质与数量、重量的异义与索赔：quality/quantity discrepancy and claim：

(17) 逾期发运：如果由于买方原因造成逾期发运，买方承担责任。造成自签订合同之日起超过45天不能发运的，卖方将每日按货物金额的3%收取保管费；如果由于买方原因造成逾期发运超过6个月，卖方有权自行处置定金和货物。如果是卖方原因造成的逾期发运，卖方需提前告知买方并得到买方的确认并承担其他相关费用。

last shipment: if the late delivery is caused by the buyer, the buyer shall bear the

responsibility. if the delay has being made more than 45 days from the signing of the sales contract hereof, the buyer shall pay 3% of total amount each day, and if the delay is more than 6 months, the seller has the right to dispose the down payment and the goods. if the late delivery is caused by the seller, the seller shall inform the buyer in advance and get confirmation from the buyer, and the related expense shall be born by the seller.

(18) 质量/数量异议：对于质量方面的异议，买方必须在货物抵达目的港后30天之类提出：对于数量方面的异议，买方必须在货物抵达目的港后15天之内提出。对由于保险公司、运输公司、其他运输机构或邮局的原因所造成的货物差异，卖方不负任何责任。 quality/quantity discrepancy: in case of quality discrepancy, claim shall be filed by the buyer within 30 days after the arrival of the goods at port of destination; while for quantity discrepancy, claim shall be filed by the buyer within 15 days after the arrival of the goods at port of destination. it is understood that the seller shall not be liable, for any discrepancy of goods shipped due to causes for which the insurance company, shipping company, other transportation organization or post office are liable.

(19) 不可抗力：卖方对由于下列原因而导致不能或暂时不能履行全部或部分合同义务的，不负责任：水灾、火灾、地震、干旱、战争或其他任何在签约时卖方不能预料、无法控制且不能避免和克服的事件。但卖方因尽快地将所发生的事件通知对方，并应在事件发生后15天内将有关机构出具的不可抗力事件的证明寄交对方。如果不可抗力事件之影响超过120天，双方应协商合同继续履行或终止履行的事宜。

force majeure: seller shall not be responsible for failure or delay in performance of entire or portion of these sale contract obligations in consequence of force majeure incidents: flood, fire, earthquake, drought, war, or any other matters couldn’t be foreseen or controlled or couldn’t be avoided. but seller shall inform the incidents to buyer immediately, and shall delivery the certificate of force majeure incidents issued by related organization within 15 days after the incidents happened. if the incidents influence more than 120 days, both parties shall negotiate to decide whether to execute or terminate the sales contract.

(20) 仲裁：因履行本合同所发生的一切争议，双方应友好协商解决，如协商仍不能解决争议，则应将争议提交中国国际经济贸易仲裁委员会（北京），依据其仲裁规则仲裁。仲裁裁决是终局的，对双方都有约束力。仲裁费应由败诉一方承担，但仲裁委员会另有裁定的除外。在仲裁期间，除仲裁部分之外的其他合同条款应继续执行。

arbitration: all disputes across from the execution of, or in connection with this sales contract shall be settled friendly through negotiation, in case no settlement can be reached, the case shall then be submitted to china international economic and

trade arbitration commission, beijing for arbitration in accordance with its provisional rules of procedure. the result of arbitration shall be born by the losing party except for the condition the commission has other judgment. during the arbitration period, clauses beside of the arbitrated parts shall be executed.

(21) 本合同为中英文对应，一式两份，买卖双方各执一份；合同自卖方签字盖章、买方签字后生效（传真件以及扫描具有正版相等法律效应）。

the sales contract is concluded in chinese and english with same effectiveness, and will come into effect on stamp of seller and signing by buyer. the sales contract is in dual original and each party shall have one original copy of this sales contract. (any scanned and faxed copy shall have the same legal effect as the original one.)

(22) 备注：remark：

买方确认签署： 卖方确认签署：

for and on behalf of buyer:for and on behalf of seller:

如何写英文简历常用语词汇4二

欢迎前来阅读浏览关于简历的。内容，小编将会及时为你整理更新关于简历的参考内容，希望对你提供帮助。

简历模板

质量经理英文简历模板

name: mr. g gender: male

wedlock: married nation: han

residence: jiangxi-ganzhou age: 39

location: jiangsu-nanjing height: 165cm

target locations: shanghai、 zhejiang、 jiangxi、 jiangsu、 hubei

target positions: quality/safety management-qa/qc manager/supervisor

management-branch manager/director

management-department director

industry/factories-quality control manager/director

target jobs: qa manager/director、 sqe manager/director、 qm/system manager

education

2001-03 ~ 2005-06 shen zhen university business management bachelor degree

1996-09 ~ 1999-07 xinyu college english junior college

1993-09 ~ 1996-07 ningdu high school arts high school

training

2006-03 ~ 2006-03 bvqi（guangdong） co.，ltd iso/ts16949:2002 internal auditor training internal auditor

2005-04 ~ 2005-04 tuv rheinland （guangdong） ltd iso14001:2004 internal auditor training internal auditor

2004-09 ~ 2004-12 c&k consultancy six sigma green belt

2004-03 ~ 2004-06 c&k consultancy lean manufacture course-completion certificate

2001-05 ~ 2001-05 tuv rheinland （guangdong） ltd iso9001:2000 internal auditor training internal auditor

work experience14 years 0 months work experience,and served on 3 companies.

【you are not full member,please contact us.】 （2006-06 ~ present）

company type: joint venture company category: electrical,micro-electronics

job title: quality manager positions: branch manager/director

job description: 1. establish,maintain and improve qms（including gjb9001b-2009），ehs & ems（include rohs &gp）& product certificate（e.g.: 3c, ul,ce,jis,csa,tuv etc.） and its documentations, education and training of quality and engineering tools/methods/demands/standards in production,quality and engineering. administer the central document control ，lab and calibration activities.

e the quality of material,npi,processes and aftersales,monitor daily operation quality status,harmonize each department to resolve process quality issue in time,lead the special quality case improvement,direct and monitor my subordinates work plan,working status,kpi performance and evaluation;

top managemet to set company goals/targets, guide and monitor all departments to set,implement,do statistic analysis their objectives and its kaizen activities（such as yield rate, equipment utilization rate,oay,lar,etc） ；

ze supplier,internal,customer and 3rd parts audit on iso system,process and product,and report its performance to top managerment,communicate on the matter with external parties such as government, customers（e.g.: airbus, cast, zhenhua electronics group,osram,ge, gm, volkswagen,motorola,lenovo, zte, tianyu, huawei, samsung ， sony,panasonic,etc.）and certification organization（e.g.: sgs,tuv,bvqi,cqc）。

,implement and upgrade quality team,team work,milestone,cost down,quality management （including dqe,lab test,sqe,iqe,pqe,oqa,8d,supplier management,ie,pe,npi），data statistic analysis,project management,lean production,production plan,logistics management,damic,based on the demands and standards of client, international organization and company.

the main customers project and oem project manangement.

direct, coach and motivate our staffs and suppliers how to achieve effectively our objective and growth.

perform other duties

achievements:

1、 have qc080000:2005 certificated by sgs and iso9001:2000certificated by bvqi in mar,2007, iso14001:2004 certificated by sqc in sept.，2007,iso/ts16949:2002 certificated by bvqi in nov.， guide three suppliers to have iso/ts16949:2002（issued by bvqi）/iso14001:2004 and qc080000（issued by tuv） certificated.

and organize the performance excellence evaluation. in nov 2011,direct our company to have gb/t***certificated by district government review team and got rmb200 thousand district mayor reward.

our staffs and suppliers to master and apply the knowledge of apqp/ppap/fmea/spc/msa,tqm,6σ，7s,qc tools and qe&ie&pe improving. and from oct. 2007 to now, we decrease iqc lrr from 15% to 2.5%，save material cost 17%，decrease claims from 22pcs to 3pcs monthly ， failure quality cost from rmb300000 to rmb10000 below monthly,fqc defect ratio from 4600ppm to 1000ppm and increase total profit 30% per year.

reason for leaving: contract will be on term and looking for better development

【you are not full member,please contact us.】 （2003-12 ~ 2006-06）

company type: multinational enterprise company category: machine-building,machine,heavy industry

job title: quality manager positions: qa/qc manager/supervisor

job description: ish,maintain and improve qms & ems and review their accordance with iso9001,qs9000,ts16949 & iso14001 standards. and possess the iso9000/qs9000/tso14001/ts16949 internal auditor certificates.

the performance of the quality issue, qms & ems and deal with the matter with external parties.

charge of cost down, quality control, quality assurance, continual improvement and audits: internal audit, supplier audit, customer audit and 3rd party audit.

ster the central document control and calibration activities and guide to establish the procedures document ，sop and sip.

5、 plan and consummate qm team and coach how to apply apqp, ppap, fmea,spc, msa,tqm, 6σ，qcc, qc tools and qe improving 。

achievements:

2005 ts16949:2002 certificated by bvqi and 3 times surveillance audit of iso9001:2000（bvqi certificated） and of iso14001:2004（tuv certificated）；

d the claim from 20 issues to 3 issues and cost down from rmb150000 yuan to rmb20000yuan per month after five month hard working（2004.5~12），increase the profit 42%， company scale and qm team have been double developed in 2005.

reason for leaving: have better development and working environment

【you are not full member,please contact us.】 （1999-07 ~ 2003-11）

company type: foreign enterprise company category: electrical,micro-electronics

job title: from sqe to qa supervisor positions: qa/qc manager/supervisor

job description: 1999/07—2001/10 act as sqe and in charge of iqc, the main job as follow:

ish sip,coach,arrange and monitor iqc to inspect hardware,plastic and electronic components,review the iqc reports, check on iqc work attendance and performance;

m, primary analyze, feedback and assist supplier to review and improve the material quality issue occurred in iqc and our process,besides,handle the defective material and trace the validity on the corrective action.

y the monthly iqc quality report such as lrr, dppm in process, and do analysis, improvement and track on the top three defect items.

ish, develop, implement and improve supplier quality assurance, policies, goals, objectives, management process, and procedures including supplier assessment, qualification, certification and qdc performance;

ing to our development strategy, quality plans and performance targets, co-work with the relative unit （buyer, engineer and other business） to provide supplier quality team with scheduled or timely communication, training, and support in qms & ems（eg. iso9001/ts16949/iso14001/rohs/gp）， management requirements and expectations, quality issues solution, continuous technical improvement activities ， so that the vendors can drive high performance and adequate supply of the qualified parts, material and service;

in the corporate approved vendors list, qualify new supplier or sub-contractor and organize annual key supplier audit with purchasing and engineering in order to ensure vendors’ compliance to procedures and completion of any outstanding items previously identified.

sible for identifying, clarifying and correlating the critical specifications and procedures in manufacturing and test processes with supplier, requesting quality reports or records, and approving fai and ppap for new or modified items from supplier.

ed in mrb disposition, call on the supplier quality review/improvement meeting and perform other duties as required.

2001/10—2003/11 act as qa supervisor,the main job as follows:

ish,maintain and improve qms,ehs & ems relating to iso9001/ qs9000/iso14001 standards. 。make up the procedures documents,sop and sip.

ng our staffs and suppliers to apply apqp,ppap,fmea,spc,msa,tqm,6σ，6s,qcc and qc tools to monitor, analyse and improve the process ability.

3、 in charge of supplier management,iqe,ipqe,oqa,new product apqp,quality audit and customer service（8d）

achievements:

our company to gain iso14001 certificate issued by tuv in dec,1999 and qs9000 certificate issued by bvqi in july,2001;

2、 assist four vendors obtaining the certificates of iso9001/qs9000/iso***issued by bvqi or afaq;

the qualification of service to the following international groups:ford,gm,higer,sony,fujifilm,panasonic/ national, philips, liteon, china machinery corp, matic etc.

se iqc lrr from 17.5% to 1.2%，reduce the material cost 7%，control cpk≥1.33 and the process defect ratio≤0.3%，keep the claim ratio under 0.1%，the profit above 35% ，the employee from 600 to 1300,qe team from 2 to 6 staffs.

reason for leaving: go home for education exam

project experience

total 3 project experience （2003-12 ~ 2011-10）

job title: ci director

project description: ***:projects management of new products and its apqp management

software environment: erp

development tools: apqp,doe,spc

project description: one year from june 2008 to june 2009 to achieve mass production of 5 types of pesd.

8 months from may 2009 to dec 2009 to achieve mass production of 6 types of chipfuse.

oct 2009 to dec 2011 to achieve mass production of camera module,solar cell module,led lighting,etc.

responsibility: design and development review,verification and validation to new products and establish its apqp,kept them running and continual improvement.

--------------------------------------------------------------------------------

***:establish new iso system for 7 times

software environment: erp

project description: 3 months to build iso/ts16949:2002 from mar 2006 to may 2006;

3 months to build ohsas18000 from aug 2006 to oct 2006;

2 months to build qc080000:2005 from mar 2007 to may 2007;

3 months from sep to nov 2007 to build iso/ts16949:2002;

3 months from oct to dec 2008 to build so9001:2008;

one month in june 2010 to certificate iso17025;

2 months from june to july 2011 to build national military standard gjb9001b-2009;

responsibility: build new iso system documents and its training,certification,maintainance and improvement.

--------------------------------------------------------------------------------

***:upgraded the iso management system for 3 times

software environment: erp

development tools: apqp,fmea,spc,msa,ppap,doe

project description: one month in dec 2003 to upgrade iso9001 from version 1994 to 2000;

one month in may 2005 to upgrade iso14001 from version 1996 to 2004;

3、 spent one month in dec 2010 to upgrade ts16949 from version 2002 to 2008;

responsibility: iso system and its documents training,certification,maintainance and improvement.

responsibility: refer to above project description.

special skills

professional title: tqm&lean production&ace

computer level: junior

computer skills: ully apply office 2000 to build the form and do statistical analysis and photoshop7.0 to edit the photos.

applying auto cad to layout the product.

ully apply the statistical soft such as spcc,minitab to do statistical analysis and continuous improvement.

strengths: 1.13+ years experience of mnc operation and tqm,so gain rich abilities or skills in communication, leadership, damic, team building, teamwork, target value, overall performance audit,cost down,claim disposure,data statistic and analysis,project management,lean production, production plan,logistics management,customer and supplier relation management.

qms（iso9001/gjb9001/vda6.1/qs9000/ts16949/tl9000）/ehs/ems（iso14001/qc080000/rohs/gp） and such product certification as ul/3c/ce/iec/tuv/csa/jis,and master,coach and apply iso,apqp,ppap,fmea,spc,msa,tqm,qcc,6σ，lean manufacture,qc tools and qe&ie&pe improving.

years project management on new products（led lamp&lighting,camera module,solar cell & its module,pesd and chip fuse,assure to meet or exceed customer needs,expectations and timing plan at valued cost according to my product quality planning timing chart for these 5 phases of concept initiation/approval, program approval, prototype, pilot, launch and such 6 processes as plan & define program, product & process design and development review, product & process design and development verification, product & process validation, feedback assessment and corrective action by apqp tool.

engaged in production operation,tqm in below fields:

a:plastic electronic and automotive parts injection,connector,cable & cooler（above 4 years）；

b:tooling,pressing&annealling&plating（terminal,shell,motor core and ic lead frame） and power coating（7 years）；

c:semiconductor components（led lamp & display, ic,diode,chip fuse,gdt,mosfet,tvs,pesd,ptc,pptc,led lighting）（above 10 years）；

d:assembly of ccm under csp or cob process & non-ccm products（5.5 years）；

e:automotive parts and electronics（tool box,handle,camera,head light,stoplight,dashlight）at smt,cob,csp and m/s process（ above 10 years）；

f:solar cell and its module（3 years）。

language skills

chinese: good cantonese: general

english level: majored in english cet-6 spoken good

english: skilled

career objective

career direction: qa/qc manager/director/deputy gm ，sqm manager,operation director/manager, qms&ems manager ， ceo/gm/president assistant.

requirements: five working days and abide by labor laws;

self info.

self assessment: year experience in foreign trade and purchasing business, familiar with operation and management of documentation;

as sjqe appointed by our customer osram,samsung,lg,philips to deal with all affairs related with them,such as operation performanc data reporting,quality management,otc and tdm confirmation,new product and project management,audit,etc.

t company has 40% sales revenue from oem customers（eg.:vishay,ge） and 20% one from odm customers（eg:osram,philips），also 20% capacity needed for oem,build and keep good relationship with oem and his suppliers,in addition,guide,implement and improve supplier quality system,management process,and procedures including supplier assessment,qualification,certification and qdc performance.

hobbies: swimming,reading.

sional tqm with strong ability in innovation,team built,teamwork,leadership and communication.

problem solving, preventive, ci and strategic planning and solid practice 。

sional customer projector quality management,8d, npi and supplier（including oem） quality management.

pled, honest, strict.

,affirmative,aspirant,honest, striving responsibility with steady-going and sure-footed working &life style.

rewards

excellent staff 2002-02-03

certifications

iso/ts16949 internal auditor 2006-03-19

ie工程师英文简历模板

name: mr. r gender: male

wedlock: single nation: han

residence: guangdong-qingyuan age: 28

location: guangdong-dongguan height: 173cm

target locations: guangdong

target positions: industry/factories-industrial engineer

industry/factories-production management clerk

industry/factories-technic engineer

target jobs: industrial engineer、 lean engineer

education

2005-09 ~ 2009-07 guangdong university of technology industral engineering bachelor degree

training

2008-12 ~ 2008-12 guopei certificate internal quality auditor training &qualification

【company name】 （2011-07 ~ present）

company type: private enterprise company category: electrical,micro-electronics

job title: industrial engineer positions: industrial engineer

job description: : process planning, fixture and equipment planning, prepare process checklist

rd time and capacity evaluation, line balance and prepare sop for new products

in the usage of the consumptive material, standard time and capacity

m line balance and improve process to rise capacity

and improve the tools and fixture in the work site

r the efficiency of the production line, analyze these reasons manpower, machine, material ， environment, method, push the relative dept to solve issues

project planning and push: auto-machine introduce, production way optimize, manpower and material saving, etc

career highlight:

-welding machine introduce: welding process operator saving（16 operators-12 operators=4 operators）， line balance rate upgrade from 83% to 91%， solder wire saving 3.2grams, cost of solder wire saving 1.6 yuan rmb for each pcba.

-packaging production line planning and implement: master carton packaging operator saving, every production line deploy 2 packaging operators for 8 lines, after introduce the new equipment it takes only 5 operator to seal the master carton

cabinet pre-process and final assembly combine: manpower saving include 1 conveyer, 1 visual inspector, 1 loading operator and 1unloading operator（total 4 operators）， and saving the usage of bubble bag and partition board

tive plate incoming package improvement: change the package material and simplify package way to reduce pack cost（from 0.13yuan to 0.09yuan rmb） and cut down unpack operation time（ saving 12 seconds）

ate with rd to change pcba process from dispensing process to solder paste process, in order to cut down welding failure rate after wave-soldering. in this case charge of pcba fixture design and improvement evaluation（repairing welding time 140sec reduce to 70sec,4 repair welding operators cut down to 2 operators）

ing to the small order quantity of the product, study the less humanizing process for small products to reduce the change over loss time（38 operators*30minute-

20 operator*40minutes=340minutes） and improve 8% of the motion effective rate

reason for leaving: not very good economic benifit of the company,little chance to promote both in position and welfare

【company name】 （2009-07 ~ 2011-06）

company type: joint venture company category: electrical,micro-electronics

job title: junior engineer positions: industrial engineer

job description: ish and maintain the standard labor time, perform line balance to improve production capacity

capacity assessment: base on the mps and the capacity of production line to forecast the workforce requirement

e the cost study report for new products, labor rate evaluate basis on factory operating cost, provide quotation to customer for special process

e the workshop layout and line layout design basis on logistics analysis

ch and develop new packaging method, develop new suppliers for packing material, make order for new packing material and follow up the schedule

with customer complaint and settle products packaging issue, improve packaging method to satisfy customer

career highlight:

1、 function test man-machine operation improvement: cooperate with te to disassemble

and rearrange test item, and modify the way of program display in the monitor, in order

to realize one person simultaneously operate two test machine

2、 line balance improvement: provide the cycle time of each model to set up assemble line speed, and upgrade the line balance rate to 80% above for all model

reason for leaving: not a very good department to pratice and learn ie skill,seek more chance to enhance myself

special skills

professional title:

computer level: national computer exam. grade 3

computer skills: familiar with windows,be good at microsoft office software;

passed national computer rank exam of database technology ；

y in auto cad of computer aided design software;

strengths: familiar with method study and standard time measurement, know well about work study technology including 5w1h inquire skill and ecrs four principles

y in ie seven techniques, comprehend production management essentials

and the activity about 5s.

familiar with logistics analysis during the production process, be capable of

facility planning and machine layout

about the basis quality management tools, such as seven qc methods and fmea technique

language skills

chinese: good cantonese: good

english level: cet-4

english: good

career objective

career direction: a position as ie engineer or lean engineer which will use the ie concept and lean production to reduce the cost of enterprise running ，promote the competitive strength,as a result to achieve the win-win target with enterprise.

requirements:

self info.

self assessment: or degree in industrial engineering, have good sense in cost down, and have successful case of improvement

in taiwan electronic company for almost two year, be familiar with smt, dip, repair welding, final assembly, test and packing process

hands-on skills, have experience in guiding operation for new production first mp

skill in auto-cad, can design and make fixture in the workshop

communication and organization skill in working with other department, have some experience in training

sibility for work and a man of great loyalty, able to learn, patient and positive.

如何写英文简历常用语词汇4三

英文简历模板范文一：

production manager

career objective

efficient supervisor seeks a team leader position to help increase productivity and meet or exceed company goals.

background summary

extensive and persified supervisory experience in computer,office furniture,and boat manufacturing ularly effective in increasing productivity and trated ability to learn new skills to supervise new departments without prior experience and meet production sfuily motivate ent interpersonal reputation for honesty and placed in a position of trust.

summary of accomplishments

supervised the start-up of second shift shipping d new employees,reached full capacity while maintaining quality and production goals.

instructed quality development courses.

participated in upgrading assembly systems at lennon and epstein systems.()

consistently met and/or surpassed production ised same day shipping of orders.

participated with lennon management team in the move of logistics,service operations from to winona ed cash achievement award for this project.

operated computerized warehouse management,inventory control and order processing systems.

researched requirements and supervised the development of a high-tech paint laboratory including procurement and staffing.

planned,arranged and supervised rework groups which traveled to on-site locations to perform engineering repairs and other problem-solving activities.

supervised development of new preassembled components of cabin cruisers at howell boat company.

consistently built and maintained strong relationships with vendors and customers through close and effective communication.

supervised,scheduled and coordinated production of four departments in a metal fabrication operation.

notice:

since candidate has held six jobs as production supervisor,he/she chooses not to repeat same job description six times.

英文简历模板范文二：

name:× × ×

school:beijing university

email:

job intentions:×××,×××

educational background

2005/09 ~ 2008/04 master of beijing university of × × × × × × direction institute (rank 0 / 00)

2001/09 ~ 2005/06 bachelor of beijing university of × × × × professional (position 0 / 000)

awards

“× ×” corporate scholarships, the first comprehensive ranking, were all only 000 enterprises ;“×××” scholarship winners; school class scholarship;

outstanding graduates in beijing; outstanding member of the school, outstanding cadres, miyoshi school students (two);

× × “××××” beijing university first cup business plan competition second prize; 0000 national undergraduate mathematical contest in modeling the success of team awards;

mission led by the beijing branch in 0000 was优秀团支部

english and professional skills

◆ english through 46 countries; toefl000 points; twe (toefl writing part i) 0.0; the national college english in 0000 the second prize competition

◆ solid foundation of the text, as well as good communication skills, in the “× × newspaper” published an article, as well as “××××××××” “×××××××”

◆ familiar with the mobile communication technology, in particular, td-scdma, wcdma and cdma2000 in the background, development, and understanding of industry market manufacturers, carriers, terminals, marketing and other operations; proficiency in the use of excel, powerpoint and spss software

internship experience

2006/11 ~ 2007/04 × × × × beijing group of wireless communications r & d center interns (full-time)

◆ track td-scdma, cdma2000 latest technology trends, collect, collate information on the wireless market, to conduct in-depth analysis of industry development, in cooperation with “td-scdma content”, an independent complete the “cdma2000 content”;

◆ manufacturers with some communication to help datang mobile td successful trial demonstration of new business networks;

depth understanding of the development of 3g industry chain with the latest developments and improve the analysis, and communication skills; the accumulation of the english market, written by industry experience report

2005/11 ~ 2006/03 × × × × communication (china) r & d center product line management intern

◆ organize china mobile wireless network test norms, translation wireless core network systems market and technical information

greatly improve the professional standard of english; understanding of testing standards for equipment operators, as well as the demand for

2003/07 ~ 2003/09 × × tianjin branch of china network interns

◆ assist members of the network, with korea exchange × × companies to carry out reception, meeting records and some translation work

widened the field of vision, access to world-class operator of the operational and technical experience; tempered spoken english as well as the habit of systematic work

project experience

2003/04 ~ 2003/11 beijing × × university of “abc” cup first business plan competition, marketing director

◆ 0 person team responsible for marketing value-added services, integration of large amounts of data research, analysis of product market positioning, development of marketing mix strategies; with the other members of the discussion and implementation of projects; write a business plan based on the demand for the book 00 of the planning document

◆ business plan competition was the second prize and china unicom''s data services center recognized

telecom mastered the basic knowledge of marketing; accumulated a certain amount of practical experience and methods of marketing; exercise of the business plan writing ability

social activities

2004/11 ~ 2006 / 12 beijing × × university graduate council liaison, vice-minister

◆ 00 people led by the team, the successful planning, implementation of the “second job forum” and × × × × companies full sponsorship in session 0, each with more than 000 spectators; activities carried out large-scale survey feedback to the company, received recognition and praise enterprises; the success of planning, “the capital of × × × × university creative competition”, to be × × × full support network media;

◆ 0 session business plan competition organizing committee members of the secretariat, the coordination of other departments, the successful completion of the drafting of the text, as well as all major outreach activities

campus-depth understanding of business strategy and marketing needs; training in collaboration with the communication ability, team leadership, as well as analysis and decision-making capacity

2004/06 ~ 2005 / 06 × × × × school year 01 arts commission members, graduate director evening

◆ during the 0 on the evening of the graduation planning process, the organization meets regularly to discuss and coordinate programs, technology, logistics group of the progress of the work, according to the capacity of each character of the distribution of tasks, working to stimulate the enthusiasm of members; 0 hours-long evening as the total graduate director, the audience show up to 000 people;

◆ other departments to assist the successful completion of graduation album, graduation celebrations, such as songs, book circulation of 0000;

the accumulation of a large-scale activities in the overall grasp of the experience, training the team leadership, coordination, ability to spot and respond to creative thinking

2003/06 ~ 2005 / 06 × × × × mission mission branch branch

◆ cadres to assist other classes meet regularly to develop and implement a professional learning program, which results from the full-line branch 00 progress to the first 0 (a total of 00 branches); to strengthen cohesiveness branches, links organized and participated in “123” × × × volunteer activities;

◆ lead branch members to participate actively in the selection of the top ten activities in 0000 was named the top ten college school branches in beijing优秀团支部;

enhance the spirit of optimistic self-confidence, and accumulated valuable experience in team-building to foster innovative thinking and analytical problem-solving ability

2001/10 ~ 2003 / 06 × × university student union beijing, minister of propaganda department

◆ 12.9 students for planning and implementation of large-scale publicity activities; to help enterprises of publicity into the campus; with other departments to complete the daily work of students

◆ and × × × × cooperation, successfully organized the first north × “×××× show, ”nearly 000 works on display

exercise a reasonable time, the ability to work efficiently; established trivial when faced with pressure and the confidence and patience; trained publicity activities

2001/10 ~ 2004 / 09 × × university, beijing youth league committee, deputy editor-in-chief directly under the weekly “×××”

◆ responsible for internal and external coordination and communication; successful edition of the newspaper 0 to 00 version of the expansion; responsible for military training during the 00 “× × × newspaper” with the publication of the planning

◆ 00 “××××” anniversary of the interview activities, the collection of well-known alumni information, contact the success of an interview with well-known alumni of 0 and write articles, published in the “××××”; “000 days celebration in 2000 countdown” activities for the whole coverage

culture of news events and the keen ability to grasp; tempered communication and interview skills; improve the organizational capacity of language and the ability to write articles

self-evaluation

self-confidence, optimism, a strong sense of responsibility; strong teamwork and communication skills; strong resistance capacity; loving to sing, travel, badminton, etc.

如何写英文简历常用语词汇4四

英文简历 | 英文简历模板 | 英文自我介绍 | 英语求职信 | 英语自我介绍

artificial intelligence computer local area network

computer abilitees

skilledin use of ms frontpage, win 95/nt, sun, javabeans, html, cgi, javascript, perl, visual interdev, distributed objects, corba, c, c++, project 98, office 97, rational requisitepro, process,pascal, pl/i and sql software

english skills

have a good command of both spoken and written english .past cet-6, toefl:623;gre:2213

scholarships and awards

1999.3 guanghua first-class scholarship for graduate

1998.11 metal machining practice award

1997.4 academic progress award

qualifications

general business knowledge relating to financial, healthcare

have a passion for the internet, and an abundance of common sense

contack info

tel:

qq:

email:

address:

如何写英文简历常用语词汇4五

necessary terms of english contract

1.前言 preamble

一份标准英文合同通常可以分为前言（preamble）、正文（operative part）、附录（schedule）及证明部分即结束词（attestation）四大部分组成。 前言（preamble）由“parties”及“recitals”两部分组成。

“parties”为必备条款，在很多时候称为“commencement”即合同的开场白，主要介绍合同各方的名称或姓名、注册地及地址、邮编及在合同中的简称。当然，并不是所有的合同都要详细介绍以上诸要素，在许多简单合同中，只是提一下各方的名称。

i. 以下为“parties”的常用表达方式：

1. this agreement is entered into by and between ____ and ____. 本协议由以下双方____和___ 签署。

2. this agreement is entered into by and between ____ (hereinafter referred to as____) and ____ (hereinafter referred to as "_____"), whereby it is agreed as follows:

本协议由以下双方____（以下简称____）和_____（以下简称___）签署，达成如下协议：

注：在很多合同中，这部分加入签约事由，如：

this agreement is entered into through friendly negotiations between _____ co.

(hereinafter referred to as the “party a”) and _____ co. (hereinafter referred to as the “party b”) based on equal

ity and mutual benefit to develop business on the terms and conditions set forth below:

本协议由_____（以下称为甲方）和____（以下称为乙方）为发展业务在平等互利的基础上签订，其条款如下：

this agreement is entered into between _____ (hereinafter referred to as "company"), and ______, (hereinafter referred to as "employee") pursuant to paragraph viii(2) of the employee handbook, whereby it is agreed as follows:

本“协议”由_____（以下简称“公司”）与_____（以下简称“雇员”）根据“雇员手册”第viii(2)款签署，“协议”内容如下：

ii. 以下为标准的“parties”条款：

3. this agreement is made and entered into this _____th day of _____ in the year of ____ by and between ______, a company duly organized and existing under and by virtue of the laws of ______, with its principal place of business at _____ (hereinafter referred to as “_____”), and ______, a company duly organized and existing under and by virtue of the laws of _____, with its principal place of business at _____ (hereinafter referred to as “_____”), whereby it is agreed as follows:

本合约由______，在_____法律之下并凭该等法律正式组织并存在的公司，其主要营业地点在______（下称_____），与_____，在_____法律之下并凭该等法律正式组织并存在的公司，其主要营业地点______（下称代理人），于_____日签订和缔结，协议如下：

iii. “recitals”由数个以"whereas"字样开头的句子所组合而成（这些句子俗称为“whereas clauses”），表示当事人乃是在基于对这些事实（例如订约的目的、背景来由等）的共同认识，订立此合约。

4. this agreement is made and entered into this _____ day of _____ in the year of ____ by and between _______, a company duly organized and existing under and by virtue of the laws of ______, with its principal place of business at ______ (hereinafter referred to as “_____”), and ______, a company duly organized and existing under and by virtue of the laws of ______, with its principal place of business at ______ (hereinafter referred

to as “_____”)

witnessed

whereas, now therefore, the parties hereto agree as follows:

本合约由_____，在_____法律之下并凭该等法律正式组织并存在的公司，其主要营业地点在______（下称_____）（或下称供应商），与_______，在_____法律之下并凭该等法律正式组织并存在的公司，其主要营业地点_

鉴于

因此，双方当事人达成以下协议：

注：witnessed可以用withnessth、withnessth that等来代替。

iv. 在很多美国常用合同中，在很多情况下直接用recitals引导数个陈述语句或“whereas clauses”。下面为一个资产购买协议实例：

this asset purchase agreement (the "agreement") is made and entered into as of may 19, 1997 by and among aaa, a delaware corporation ("aaa"), bbb, a delaware corporation and wholly-owned subsidiary of aaa ("buyer"), ccc ("summit"), and ddd, an oregon corporation and wholly-owned subsidiary of summit ("seller").

recitals

a. the boards of directors of each of summit, seller, aaa and buyer believe it is in the best interests of each company and their respective security holders that buyer acquire certain listed assets and assume certain listed liabilities of seller (the "acquisition").

b. on the date hereof, buyer has executed a $2,000,000 irrevocable purchase order to purchase 400 time-based licenses for summit's visual hdl interfaces for visual test bench ("vtb") software on aaa's standard form of purchase order, which is payable within five (5) business days after the date hereof.

now, therefore, in consideration of the covenants, promises and representations set forth herein, and for other good and valuable consideration, the parties agree as follows:

2.定义 definition

在正文（habendum）部分，通常第一章为定义（definitions）部分。

定义条款即对合同中涉及的术语及名词作出限定、解释的条款。它可以散见于合同各个部分，但对于一些大型的、重要的合同，通常将其置于第一章。

i. 常见的定义语句常用mean, refer to, be construed as, include等来表达。如：

1. "territory" means the united states of america.“销售地区”是指美利坚合众国。

2. “commencement date” shall mean the date of signing this agreement by the last signing party hereto.

“协议生效日”是指本“协议”最后签字的一方签署本“协议”的日期。

3. the “agreement” herein referred to shall mean this agreement of agency by entrustment.

“协议”在这里是指本委托代理协议。

4. “code” shall refer to the current and applicable internal revenue code.

“法”是指当前可用的国内税收法。

5. reference to any statutory provision shall be construed as a reference to the same as it may have been, or may from time be, amended, modified or re-enacted.

引用法律规定理解为引用其本身外，还包括其修订、修正或重新实施案。

6. "expenses" include costs, charges and expenses of every description. “费用”包括各种形式的金钱支出。

ii. 还有一类特殊的定义语句，即对于「单、复数」及「阴、阳性」名词的范围定义。通常都是用include来表达：

1. "stock certificate" includes "stock certificate" and "stock certificates".

合同中的“股票”，包括单数与复数。

2. "he" includes "he" and "she".

合同中的“他”，包括“他”与“她”。

3. words using the singular or plural number also include the plural or singular number.

采用单数或复数的单词也包括复数或单数。

iii. 定义语句中，有时需限定范围。而通常用得最多的是：“for the purpose of ”及“in relation to”某概念的定义条款，如果适用范围仅限于合同的“特定部份”，可以用“for the purpose of ”来为定义条款起头。而如果定义条款是针对合同的“特定概念”，就用“in relation to”来界定。如下例：

1. for the purpose of this agreement, "products" means all types of the machineries manufactured by manufacturer as are specified in attachment

a hereto.

本协议所称的“产品”，指制造人所制造如附件a表列之各式机器。

2. "address" means－

(a) 就自然人而言in relation to an inpidual, his usual residential or business address; and

(b) in relation to a corporation, its registered or principal office in the republic of china.

“地址”就自然人而言，指通常之居所或工作场所；就公司而言，指位于中华人民共和国之注册所在地或主营业所。

iv. 在定义条款中，在定义语句前有时会加上一些陈述语句来引导，如：